265/75R16 vs 285/75R16
A calculated comparison of tire dimensions, speedometer change and clearance.
Last checked 12 October 2026Published by Sidewall GuideFormulas follow the Tire and Rim Association and ETRTO size conventions
3–5%: check clearance and speedometer
A similar diameter does not confirm fitment. Check load index, wheel width and clearance.
| Dimension | Current | New | Difference |
|---|---|---|---|
| Overall diameter | 31.65 in (804 mm) | 32.83 in (834 mm) | +1.18 in (+3.7%) |
| Section width | 10.43 in (265 mm) | 11.22 in (285 mm) | +0.79 in (+7.5%) |
| Sidewall height | 7.82 in (199 mm) | 8.42 in (214 mm) | +0.59 in (+7.5%) |
| Circumference | 99.43 in (2,526 mm) | 103.14 in (2,620 mm) | +3.71 in (+3.7%) |
| Revolutions per mile | 637 | 614 | −23 (−3.6%) |
Your speedometer
When your speedometer reads 30 / 45 / 60 / 75 mph, you are really doing …
| Speedometer reads | You are really doing |
|---|---|
| 30 mph | 31.1 mph |
| 45 mph | 46.7 mph |
| 60 mph | 62.2 mph |
| 75 mph | 77.8 mph |
Your speedometer will read low: you are going faster than it shows.
Your odometer will count 1,000 miles when you have driven 1,037 miles.
Clearance
Ride height: +0.59 in
Tread edge: +0.39 in further out and +0.39 in further in, on the same wheel offset
Ride height is half the diameter change. The width change splits equally to each side of the tire.
Fitment
Can I fit 285/75R16 instead of 265/75R16?
The calculated overall diameter changes by 1.18 in (3.7%). That is between 3% and 5%, so clearance and speedometer effects need careful review. This calculation cannot confirm fitment for a specific vehicle.
Plus-sizing
Other sizes near 265/75R16
Common sizes on the same wheel and on +1 and +2 wheels whose overall diameter stays within 3% of 265/75R16's 31.65 in.
Next step
Compare your own sizes
Use the calculator with both sizes prefilled, then change either value to match your vehicle or replacement tire.
Compare your own sizes